Read or download the complete SDK project, then follow its setup on your computer. The separate C# companion practice below runs in SharpRune’s .NET 9 console environment.
Count attempts before calling a retry policy resilient
Repeating an operation can improve recovery from selected transient failures, but it also adds demand to the system already failing. Five logical operations with a maximum of three attempts can produce fifteen attempts. Independent retry layers can multiply that bound further. The portable companion performs this arithmetic and displays deterministic teaching offsets. The external driver retries only a controlled GET, caps the sequence at two attempts and reports attempts separately from scheduled logical work. Neither program grants permission to repeat a payment, reservation or arbitrary write merely because a failure looked temporary.
Follow one deliberately failed attempt and its successor
The console prints maximum attempts fifteen, then teaching waits twenty-three, forty-seven and eighty-two. Its exponential bases and fixed offsets illustrate a spread without being a recommended production random generator. On a fresh external server, the demo route returns503 on its first call and success on the next. A one-operation retry driver run therefore reports scheduled one, attempted two and successful one. Its rejected field represents final non-success outcomes, so the retried503 is still a recorded attempt latency but is not a final rejected logical operation. Inspect those definitions before interpreting the report.
Failure classification and idempotency are separate decisions
A transient status does not establish that repeating an operation is safe. A server might have committed a mutation before the client observed a timeout or broken connection. An idempotency protocol needs a key meaning, conflict policy, retention and a transactional boundary that covers the intended state change. The later local SQLite lab demonstrates only one such bounded storage boundary. Keep retry permission separate from selecting which outcomes are transient. The classroom GET has no purchase effect, while a production adapter should follow the actual service's documented semantics and reconciliation guidance rather than copying this loop onto every request method.
Backoff and jitter do not replace a total budget
Waiting between attempts can reduce synchronization, and randomized jitter can spread many clients that would otherwise retry together. The driver's small index-based offset is intentionally deterministic for the lab; it does not claim independent production randomness. An attempt ceiling also needs a total time budget, because several long attempts and delays can outlive the caller's useful deadline. Server Retry-After guidance, cancellation and retryable response disposal need their own rules. More delays cannot make a permanently failing operation recover, and more replicas with identical retry behavior can amplify pressure on one shared dependency.
Practice: prove a terminal failure boundary
Use the external always-failing route in a separate controlled driver copy with the same two-attempt ceiling. Specify attempted count, final outcome and bounded delay before running one logical operation. Verify that the driver stops rather than retrying indefinitely. Then change the response to a nonretryable category and expect one attempt. Keep the original first-failure-then-success sequence as a control. The hint is to count actual attempts and final logical outcomes independently, so a test cannot pass merely because every non-success response was hidden behind another retry.
Practice: calculate stacked demand without sending it
Model three application attempts around a downstream adapter that can itself attempt twice. For five logical operations, calculate the worst-case downstream attempt count before running any external experiment. Explain where a shared time or attempt owner could prevent this multiplication. Then describe a hypothetical mutating operation and the evidence needed before repeating it after an uncertain result. Do not send that hypothetical operation to a public service. The independent objectives are to expose amplification arithmetic and to state a write's idempotency boundary, which a schedule or status code alone cannot supply.
Make every repeat observable and intentional
A good retry review names the operation, allowed failure classes, attempt ceiling, total deadline, delay policy, cancellation owner and side-effect contract. The portable arithmetic explains one maximum while real controlled HTTP establishes the testbed's actual sequence. Preserve per-attempt observations as well as logical results, since retries can improve a final success count while worsening resource pressure or latency. The lesson deliberately stays within bounded owned traffic and a read-only classroom endpoint. Production integration adds service-specific evidence; it should not inherit a stronger resilience or exactly-once claim simply from the presence of a retry loop.
- Count per-attempt demand and logical-operation outcomes as different quantities.
- Jitter spreads schedules; it does not make a write safe to repeat or replace a deadline.
Retries, amplification, jitter and idempotency — real bounded loopback testbed
Set up the SDK project
- Save the complete Server and Driver directories plus global.json into one new owned folder. Install official .NET10 SDK10.0.403.
- Restore both projects explicitly: dotnet restore Server/Lab.Server.csproj --source https://api.nuget.org/v3/index.json ; then dotnet restore Driver/Lab.Driver.csproj --source https://api.nuget.org/v3/index.json
- In terminal1 start the first owned server: ASPNETCORE_ENVIRONMENT=Development dotnet run --project Server/Lab.Server.csproj --no-launch-profile --urls http://127.0.0.1:5081 --Lab:Replica=one --Lab:LedgerPath=./owned-ledger.db --Lab:Workers=2 --Lab:QueueCapacity=4 --Lab:PoolSize=2 --Lab:WorkMilliseconds=20
- For two-replica experiments use terminal2 with port5082, Lab:Replica=two and Lab:Partition=1. Resolve both ledger paths to the same owned absolute file only when the lesson explicitly tests shared local coordination.
- Run drivers only against your owned loopback ports. Maximum32 logical operations, maximum8 in flight and at most2 retry attempts keep each run below100 requests. Outputs include variable measured timings.
- Stop only the processes you started using Ctrl+C in their own terminals; clean up only your owned fixture directory.
- Against a fresh server run driver retry with1 logical operation and concurrency1. Inspect attempted=2, successful=1 after the deliberate first503.
Download complete SDK project ↗
Project files
Server/Lab.Server.csproj
Download file ↗<Project Sdk="Microsoft.NET.Sdk.Web"><PropertyGroup><TargetFramework>net10.0</TargetFramework><Nullable>enable</Nullable><ImplicitUsings>enable</ImplicitUsings></PropertyGroup><ItemGroup><PackageReference Include="Microsoft.Data.Sqlite" Version="10.0.14" /></ItemGroup></Project>
Server/Program.cs
Download file ↗using Microsoft.AspNetCore.Hosting.Server;
using Microsoft.AspNetCore.Hosting.Server.Features;
using Microsoft.Data.Sqlite;
var builder = WebApplication.CreateBuilder(args);
var settings = new LabSettings {
Replica = builder.Configuration["Lab:Replica"] ?? "one",
Workers = builder.Configuration.GetValue("Lab:Workers", 2),
Partition = builder.Configuration.GetValue("Lab:Partition", 0),
QueueCapacity = builder.Configuration.GetValue("Lab:QueueCapacity", 4),
PoolSize = builder.Configuration.GetValue("Lab:PoolSize", 2),
WorkMilliseconds = builder.Configuration.GetValue("Lab:WorkMilliseconds", 20),
LedgerPath = builder.Configuration["Lab:LedgerPath"] ?? Path.Combine(Path.GetTempPath(), "sharprune-local-ledger.db")
};
settings.Validate(); builder.Services.AddSingleton(settings); builder.Services.AddSingleton<LabRuntime>(); builder.Services.AddSingleton<LocalIo>();
builder.Services.AddSingleton<IHostedService>(services => services.GetRequiredService<LabRuntime>());
builder.Services.AddSingleton<LocalLedger>(); var app = builder.Build();
app.Services.GetRequiredService<LocalLedger>().Initialize();
app.MapGet("/instance", (LabRuntime lab) => new { replica = settings.Replica, visits = lab.Visit() });
app.MapGet("/live", () => TypedResults.Text("live"));
app.MapGet("/io-delay", async (CancellationToken token) => { await Task.Delay(20, token); return TypedResults.Text("controlled loopback reply"); });
app.MapGet("/io", async (CancellationToken token, IServer server, LocalIo io) => {
using var response = await io.Client.GetAsync(LocalAddress(server), token); response.EnsureSuccessStatusCode(); _ = await response.Content.ReadAsByteArrayAsync(token);
return TypedResults.Ok(new { replica = settings.Replica, kind = "async-loopback-http" });
});
app.MapGet("/sync", (CancellationToken token, IServer server, LocalIo io) => {
using var response = io.Client.GetAsync(LocalAddress(server), token).GetAwaiter().GetResult(); response.EnsureSuccessStatusCode(); _ = response.Content.ReadAsByteArrayAsync(token).GetAwaiter().GetResult();
return TypedResults.Ok(new { replica = settings.Replica, kind = "deliberate-blocking-demo" });
});
app.MapGet("/cpu", () => { uint value = 1; for (int i = 0; i < 200000; i++) value = unchecked(value * 1664525 + 1013904223); return TypedResults.Ok(new { replica = settings.Replica, kind = "bounded-cpu", value }); });
app.MapGet("/threadpool", () => new { threads = ThreadPool.ThreadCount, pending = ThreadPool.PendingWorkItemCount, completed = ThreadPool.CompletedWorkItemCount });
app.MapGet("/ready", (LabRuntime lab) => lab.Accepting ? Results.Ok(new { ready = true }) : Results.StatusCode(503));
app.MapGet("/stats", (LabRuntime lab) => new { replica = settings.Replica, accepting = lab.Accepting, main = lab.Main.Snapshot(), batch = lab.Batch.Snapshot(), dependencyCalls = lab.Circuit.DependencyCalls });
app.MapGet("/work", (HttpContext context, LabRuntime lab, int? budgetMs) => Handle(context, lab.Main, lab, budgetMs));
app.MapGet("/batch", (HttpContext context, LabRuntime lab, int? budgetMs) => Handle(context, lab.Batch, lab, budgetMs));
app.MapGet("/unstable", (LabRuntime lab, string? key) => {
if (key != "demo" && key != "always") return Results.BadRequest();
int attempt = lab.Attempt(key); return key == "always" || attempt == 1 ? Results.StatusCode(503) : Results.Ok(new { replica = settings.Replica, attempt });
});
app.MapGet("/session/{name}", (LabRuntime lab, string name) => name == "demo" ? Results.Ok(new { replica = settings.Replica, value = lab.Session() }) : Results.BadRequest());
app.MapPost("/once/{key}", (string key, LedgerInput input, LocalLedger ledger) => {
if (key != "demo" || input.Amount is < 1 or > 100) return Results.BadRequest();
LedgerDecision result = ledger.Record(key, input.Amount); return result.Conflict ? Results.Conflict(new { error = "key amount conflict" }) : Results.Ok(result);
});
app.MapGet("/ledger", (LocalLedger ledger) => new { receipts = ledger.Count() });
app.MapGet("/guarded", (LabRuntime lab) => lab.Circuit.Invoke(lab.DependencyFailing));
app.MapGet("/partition/{key}", (string key, int? owner) => {
if (key != "A" && key != "B") return Results.BadRequest();
int partition = StablePartition.For(key, 2);
return owner == partition && settings.Partition == partition ? Results.Ok(new { replica = settings.Replica, partition, key }) : Results.Conflict(new { expectedPartition = partition });
});
if (app.Environment.IsDevelopment()) {
app.MapPost("/lab/gate/{lane}/{action}", (string lane, string action, LabRuntime lab) => {
WorkLane? target = lane == "main" ? lab.Main : lane == "batch" ? lab.Batch : null;
if (target is null || action != "open" && action != "close") return Results.BadRequest();
if (action == "open") target.Gate.Open(); else target.Gate.Close(); return Results.NoContent();
});
app.MapPost("/lab/drain", (LabRuntime lab) => { lab.Drain(); return Results.NoContent(); });
app.MapPost("/lab/dependency/{failing:bool}", (bool failing, LabRuntime lab) => { lab.DependencyFailing = failing; return Results.NoContent(); });
}
app.Run();
static async Task<IResult> Handle(HttpContext context, WorkLane lane, LabRuntime lab, int? budgetMs) {
if (budgetMs is < 1 or > 1000) return Results.BadRequest();
using var budget = CancellationTokenSource.CreateLinkedTokenSource(context.RequestAborted);
if (budgetMs is int milliseconds) budget.CancelAfter(milliseconds);
var item = new WorkItem(budget.Token);
AdmissionDecision decision = lab.Admit(lane, item);
if (decision == AdmissionDecision.Draining) return Results.StatusCode(503);
if (decision == AdmissionDecision.Full) return Results.StatusCode(429);
try { await item.Completion.Task.WaitAsync(budget.Token); return Results.Ok(new { replica = lab.Settings.Replica, completed = true }); }
catch (OperationCanceledException) when (!context.RequestAborted.IsCancellationRequested) { return Results.Problem(statusCode: 504, title: "Classroom work budget expired"); }
}
static Uri LocalAddress(IServer server) {
string address = server.Features.Get<IServerAddressesFeature>()!.Addresses.Single();
return new UriBuilder("http", "127.0.0.1", new Uri(address).Port) { Path = "/io-delay" }.Uri;
}
public sealed class LocalIo : IDisposable { public HttpClient Client { get; } = new() { Timeout = TimeSpan.FromSeconds(5) }; public void Dispose() => Client.Dispose(); }
public sealed record LedgerInput(int Amount);
public sealed class LabSettings {
public string Replica { get; init; } = "one"; public int Partition { get; init; } public int Workers { get; init; } public int QueueCapacity { get; init; }
public int PoolSize { get; init; } public int WorkMilliseconds { get; init; } public string LedgerPath { get; init; } = "";
public void Validate() {
if (Partition is < 0 or > 1 || Replica.Length is < 1 or > 32 || Workers is < 1 or > 8 || QueueCapacity is < 1 or > 16 || PoolSize is < 1 or > 8 || WorkMilliseconds is < 1 or > 250 || string.IsNullOrWhiteSpace(LedgerPath)) throw new InvalidOperationException("Invalid bounded lab settings");
}
}
public enum AdmissionDecision { Accepted, Full, Draining }
public sealed class LabRuntime : IHostedService, IDisposable {
private readonly object admissionSync = new();
private int accepting = 1, visits, sessions, demoAttempts, alwaysAttempts, failing = 1, disposed;
public LabSettings Settings { get; } public WorkLane Main { get; } public WorkLane Batch { get; }
public ClassroomCircuit Circuit { get; } = new();
public LabRuntime(LabSettings settings) { Settings = settings; Main = new(settings.Workers, settings.QueueCapacity, settings.PoolSize, settings.WorkMilliseconds); Batch = new(1, 1, 1, settings.WorkMilliseconds); }
public bool Accepting => Volatile.Read(ref accepting) == 1;
public bool DependencyFailing { get => Volatile.Read(ref failing) == 1; set => Volatile.Write(ref failing, value ? 1 : 0); }
public void Drain() { lock (admissionSync) Volatile.Write(ref accepting, 0); }
public AdmissionDecision Admit(WorkLane lane, WorkItem item) {
lock (admissionSync) {
if (!Accepting) return AdmissionDecision.Draining;
return lane.TrySubmit(item) ? AdmissionDecision.Accepted : AdmissionDecision.Full;
}
}
public int Visit() => Interlocked.Increment(ref visits); public int Session() => Interlocked.Increment(ref sessions);
public int Attempt(string key) => key == "demo" ? Interlocked.Increment(ref demoAttempts) : Interlocked.Increment(ref alwaysAttempts);
public Task StartAsync(CancellationToken token) { Main.Start(); Batch.Start(); return Task.CompletedTask; }
public Task StopAsync(CancellationToken token) => Task.WhenAll(Main.StopAsync(token), Batch.StopAsync(token));
public void Dispose() { if (Interlocked.Exchange(ref disposed, 1) != 0) return; Main.Dispose(); Batch.Dispose(); }
}
public static class StablePartition {
public static int For(string key, int count) { uint hash = 2166136261; foreach (byte b in System.Text.Encoding.UTF8.GetBytes(key)) hash = unchecked((hash ^ b) * 16777619); return (int)(hash % (uint)count); }
}
Server/WorkLane.cs
Download file ↗using System.Threading.Channels;
public sealed record WorkItem(CancellationToken Token) { public TaskCompletionSource<bool> Completion { get; } = new(TaskCreationOptions.RunContinuationsAsynchronously); }
public sealed class AsyncGate {
private readonly object sync = new(); private TaskCompletionSource<bool> source = Completed();
private static TaskCompletionSource<bool> Completed() { var value = new TaskCompletionSource<bool>(TaskCreationOptions.RunContinuationsAsynchronously); value.SetResult(true); return value; }
public void Close() { lock (sync) { if (source.Task.IsCompleted) source = new(TaskCreationOptions.RunContinuationsAsynchronously); } }
public void Open() { lock (sync) source.TrySetResult(true); }
public Task WaitAsync(CancellationToken token) { lock (sync) return source.Task.WaitAsync(token); }
}
public sealed class WorkLane : IDisposable {
private readonly Channel<WorkItem> queue; private readonly SemaphoreSlim pool; private readonly int workers, milliseconds;
private readonly CancellationTokenSource stop = new(); private Task[] running = Array.Empty<Task>();
private int active, inPool, maxActive, maxPool, accepted, rejected, completed, canceled, disposed;
public AsyncGate Gate { get; } = new();
public WorkLane(int workers, int capacity, int poolSize, int milliseconds) {
this.workers = workers; this.milliseconds = milliseconds; pool = new(poolSize, poolSize);
queue = Channel.CreateBounded<WorkItem>(new BoundedChannelOptions(capacity) { FullMode = BoundedChannelFullMode.Wait, SingleWriter = false, SingleReader = workers == 1 });
}
public void Start() { running = Enumerable.Range(0, workers).Select(_ => RunAsync()).ToArray(); }
public bool TrySubmit(WorkItem item) { if (queue.Writer.TryWrite(item)) { Interlocked.Increment(ref accepted); return true; } Interlocked.Increment(ref rejected); return false; }
private async Task RunAsync() {
await foreach (WorkItem item in queue.Reader.ReadAllAsync(stop.Token)) {
int now = Interlocked.Increment(ref active); Maximum(ref maxActive, now); bool entered = false;
using var lifetime = CancellationTokenSource.CreateLinkedTokenSource(item.Token, stop.Token);
try {
lifetime.Token.ThrowIfCancellationRequested(); await Gate.WaitAsync(lifetime.Token);
await pool.WaitAsync(lifetime.Token); entered = true; Maximum(ref maxPool, Interlocked.Increment(ref inPool));
await Task.Delay(milliseconds, lifetime.Token); Interlocked.Increment(ref completed); item.Completion.TrySetResult(true);
} catch (OperationCanceledException) { Interlocked.Increment(ref canceled); item.Completion.TrySetCanceled(lifetime.Token); }
finally { if (entered) { Interlocked.Decrement(ref inPool); pool.Release(); } Interlocked.Decrement(ref active); }
}
}
private static void Maximum(ref int field, int value) { int old; do { old = Volatile.Read(ref field); if (old >= value) return; } while (Interlocked.CompareExchange(ref field, value, old) != old); }
public object Snapshot() => new { active = Volatile.Read(ref active), queued = queue.Reader.Count, inPool = Volatile.Read(ref inPool), maxActive = Volatile.Read(ref maxActive), maxPool = Volatile.Read(ref maxPool), accepted = Volatile.Read(ref accepted), rejected = Volatile.Read(ref rejected), completed = Volatile.Read(ref completed), canceled = Volatile.Read(ref canceled) };
public async Task StopAsync(CancellationToken token) {
queue.Writer.TryComplete();
try { await Task.WhenAll(running).WaitAsync(token); }
catch (OperationCanceledException) when (token.IsCancellationRequested) { stop.Cancel(); Gate.Open(); try { await Task.WhenAll(running); } catch (OperationCanceledException) { } }
}
public void Dispose() { if (Interlocked.Exchange(ref disposed, 1) != 0) return; stop.Cancel(); pool.Dispose(); stop.Dispose(); }
}
Server/LocalLedger.cs
Download file ↗using Microsoft.Data.Sqlite;
public sealed record LedgerDecision(bool Replay, bool Conflict, int Amount);
public sealed class LocalLedger {
private readonly string connectionString;
public LocalLedger(LabSettings settings) { connectionString = new SqliteConnectionStringBuilder { DataSource = settings.LedgerPath, DefaultTimeout = 2 }.ToString(); }
private SqliteConnection Open() { var connection = new SqliteConnection(connectionString); connection.Open(); return connection; }
public void Initialize() { using var connection = Open(); using var command = connection.CreateCommand(); command.CommandText = "CREATE TABLE IF NOT EXISTS receipts (request_key TEXT PRIMARY KEY, amount INTEGER NOT NULL)"; command.ExecuteNonQuery(); }
public LedgerDecision Record(string key, int amount) {
using var connection = Open(); using var transaction = connection.BeginTransaction();
using var insert = connection.CreateCommand(); insert.Transaction = transaction;
insert.CommandText = "INSERT INTO receipts(request_key, amount) VALUES ($key, $amount) ON CONFLICT(request_key) DO NOTHING";
insert.Parameters.AddWithValue("$key", key); insert.Parameters.AddWithValue("$amount", amount); int changed = insert.ExecuteNonQuery();
using var read = connection.CreateCommand(); read.Transaction = transaction; read.CommandText = "SELECT amount FROM receipts WHERE request_key = $key"; read.Parameters.AddWithValue("$key", key);
int stored = Convert.ToInt32(read.ExecuteScalar(), System.Globalization.CultureInfo.InvariantCulture); transaction.Commit();
return new LedgerDecision(changed == 0, stored != amount, stored);
}
public int Count() { using var connection = Open(); using var read = connection.CreateCommand(); read.CommandText = "SELECT COUNT(*) FROM receipts"; return Convert.ToInt32(read.ExecuteScalar(), System.Globalization.CultureInfo.InvariantCulture); }
}
Server/ClassroomCircuit.cs
Download file ↗public sealed class ClassroomCircuit {
private readonly object sync = new(); private int failures, calls; private bool probe; private DateTimeOffset openUntil = DateTimeOffset.MinValue;
public int DependencyCalls { get { lock (sync) return calls; } }
public IResult Invoke(bool failing) {
lock (sync) {
DateTimeOffset now = DateTimeOffset.UtcNow;
if (openUntil != DateTimeOffset.MinValue && now < openUntil) return Results.Json(new { state = "open", called = false }, statusCode: 503);
if (probe) return Results.Json(new { state = "probe-busy", called = false }, statusCode: 503);
bool halfOpen = openUntil != DateTimeOffset.MinValue; if (halfOpen) probe = true;
calls++;
// The dependency is an explicitly controlled in-process classroom outcome, not a real remote service.
if (failing) {
failures++; if (halfOpen || failures >= 2) openUntil = now.AddMilliseconds(250); probe = false;
return Results.Json(new { state = openUntil == DateTimeOffset.MinValue ? "closed" : "open", called = true }, statusCode: 503);
}
failures = 0; openUntil = DateTimeOffset.MinValue; probe = false; return Results.Ok(new { state = "closed", called = true });
}
}
}
Driver/Lab.Driver.csproj
Download file ↗<Project Sdk="Microsoft.NET.Sdk"><PropertyGroup><OutputType>Exe</OutputType><TargetFramework>net10.0</TargetFramework><Nullable>enable</Nullable><ImplicitUsings>enable</ImplicitUsings></PropertyGroup></Project>
Driver/Program.cs
Download file ↗using System.Collections.Concurrent;
using System.Diagnostics;
using System.Globalization;
using System.Text.Json;
if (args.Length < 2) throw new ArgumentException("Usage: closed|open|retry|shard|hot|io|cpu|sync baseUrl[,baseUrl] [count<=32] [concurrency<=8] [intervalMs]");
string mode = args[0];
if (!new[] { "closed", "open", "retry", "shard", "hot", "io", "cpu", "sync" }.Contains(mode)) throw new ArgumentException("Unknown mode");
Uri[] targets = args[1].Split(',').Select(s => new Uri(s.TrimEnd('/') + "/")).ToArray();
if (targets.Length is < 1 or > 2 || targets.Any(u => !u.IsLoopback || u.Scheme != "http" || u.AbsolutePath != "/" || !string.IsNullOrEmpty(u.Query) || !string.IsNullOrEmpty(u.UserInfo))) throw new ArgumentException("Only one or two owned HTTP loopback roots are allowed");
int count = args.Length > 2 ? int.Parse(args[2], CultureInfo.InvariantCulture) : 16;
int concurrency = args.Length > 3 ? int.Parse(args[3], CultureInfo.InvariantCulture) : 4;
int interval = args.Length > 4 ? int.Parse(args[4], CultureInfo.InvariantCulture) : 2;
if (count is < 1 or > 32 || concurrency is < 1 or > 8 || interval is < 1 or > 100 || (mode == "shard" || mode == "hot") && targets.Length != 2) throw new ArgumentException("Bounded local settings required");
using var client = new HttpClient { Timeout = TimeSpan.FromSeconds(5) };
var latencies = new ConcurrentBag<double>(); var replicas = new ConcurrentDictionary<string, byte>(StringComparer.Ordinal);
int attempted = 0, successful = 0, rejected = 0, skipped = 0, logical = 0;
async Task Invoke(int index) {
string key = mode == "hot" || index % 2 == 0 ? "A" : "B"; int partition = Partition(key);
Uri target = targets[(mode == "shard" || mode == "hot") ? partition : index % targets.Length];
string route = mode switch { "retry" => "unstable?key=demo", "shard" or "hot" => "partition/" + key + "?owner=" + partition, "io" => "io", "cpu" => "cpu", "sync" => "sync", _ => "work" };
int maximumAttempts = mode == "retry" ? 2 : 1;
for (int attempt = 1; attempt <= maximumAttempts; attempt++) {
var begin = Stopwatch.GetTimestamp(); Interlocked.Increment(ref attempted);
using var request = new HttpRequestMessage(HttpMethod.Get, new Uri(target, route));
using var response = await client.SendAsync(request); string body = await response.Content.ReadAsStringAsync();
latencies.Add(Stopwatch.GetElapsedTime(begin).TotalMilliseconds);
if ((int)response.StatusCode == 503 && attempt < maximumAttempts) { await Task.Delay(10 + index % 7); continue; }
if (response.IsSuccessStatusCode) {
Interlocked.Increment(ref successful); using var doc = JsonDocument.Parse(body);
if (doc.RootElement.TryGetProperty("replica", out var name)) replicas.TryAdd(name.GetString()!, 0);
} else Interlocked.Increment(ref rejected);
break;
}
}
var elapsed = Stopwatch.StartNew();
if (mode == "open") {
using var slots = new SemaphoreSlim(concurrency, concurrency); var running = new List<Task>();
for (int i = 0; i < count; i++) {
double wait = i * interval - elapsed.Elapsed.TotalMilliseconds; if (wait > 0) await Task.Delay(TimeSpan.FromMilliseconds(wait));
Interlocked.Increment(ref logical);
if (!slots.Wait(0)) { Interlocked.Increment(ref skipped); continue; }
int index = i; running.Add(Release(index));
}
await Task.WhenAll(running);
async Task Release(int index) { try { await Invoke(index); } finally { slots.Release(); } }
} else {
int next = -1;
await Task.WhenAll(Enumerable.Range(0, concurrency).Select(async _ => {
while (true) { int index = Interlocked.Increment(ref next); if (index >= count) return; Interlocked.Increment(ref logical); await Invoke(index); }
}));
}
elapsed.Stop(); double[] sorted = latencies.OrderBy(x => x).ToArray();
double Percentile(double probability) => sorted.Length == 0 ? 0 : sorted[(int)Math.Ceiling(probability * sorted.Length) - 1];
Console.WriteLine(JsonSerializer.Serialize(new { mode, scheduled = logical, attempted, successful, rejected, skipped, concurrency, elapsedMs = elapsed.Elapsed.TotalMilliseconds, p50Ms = Percentile(.5), p95Ms = Percentile(.95), p99Ms = Percentile(.99), replicas = replicas.Keys.OrderBy(x => x).ToArray() }));
static int Partition(string key) { uint hash = 2166136261; foreach (byte b in System.Text.Encoding.UTF8.GetBytes(key)) hash = unchecked((hash ^ b) * 16777619); return (int)(hash % 2); }
Server/appsettings.json
Download file ↗{
"Lab": {
"Replica": "one",
"Workers": 2,
"QueueCapacity": 4,
"PoolSize": 2,
"WorkMilliseconds": 20
}
}
Expected result
The controlled GET retries once and succeeds; attempts exceed logical operations. Delays and elapsed measurements are actual bounded observations, not universal timings.
Use the listed SDK and dependencies for this project. Open C# practice runs the separate portable exercise.
C# companion practice
using System;
using System.Linq;
using System.Collections.Generic;
using System.Globalization;
using System.Threading;
using System.Threading.Tasks;
int operations = 5, maxAttempts = 3; Console.WriteLine("maximum attempts:" + operations * maxAttempts); int[] offsets = { 3, 7, 2 };
Console.WriteLine("teaching waits:" + string.Join(",", Enumerable.Range(0, 3).Select(i => 20 * (1 << i) + offsets[i])));
C# practice output
maximum attempts:15 teaching waits:23,47,82
A retry budget counts total attempts; jitter does not supply a write’s idempotency contract.